Dimensional Accuracy on the Ultimaker S5

Dimensional Accuracy on the Ultimaker S5

To improve the dimensional accuracy on the Ultimaker S5, you can change the following Cura settings:
  1. Set line width equal to nozzle diameter
  2. Equalize all speed settings (infill, outer wall, inner wall, etc.) to about 40 mm/s
  3. Set all jerk settings to 20 mm/s

    • Related Articles

    • Networking Considerations for the Ultimaker 3, Ultimaker 3 Extended and Ultimaker S5

      The Ultimaker 3 series and Ultimaker S5 include wired and wireless networking capabilities. Your IT department may have questions about this from a security perspective. Here are some notes that may be useful: The Ultimaker 3 series and Ultimaker S5 ...

    • Which Ultimaker Print Cores Should I Use?

      All current UltiMaker printers equipped with dual-extrusion capabilities use interchangeable print cores. There are different print cores available, depending on what you're looking to do. In order to change to a different size or type of nozzle, you ...

    • Which 3D printer should I get for making e-NABLE devices?

      Choosing the right 3D printer can be a difficult process. There are many options available, and a lot of it depends on your budget and preferences. Most 3D printers are capable of printing e-NABLE devices. I would recommend steering clear of “mini” ...

    • Information about Mayku Form Sheets and Cast Sheets (for the Mayku FormBox)

      SHEETS / MATERIALS Form Sheets - HIPS (High Impact Polystyrene) White Satin Surface Easy to Cut Ready to Paint Durable Replicates Fine Detail The durable, satin surface of the Mayku Form Sheet makes it effortless to achieve a professional finish for ...

    • Which CAD software should I use with my 3D printer?

      When 3D printing, you'll want to have your 3D models in either STL or OBJ file format. When you're ready to 3D print your design, you'll load your STL or OBJ file into your slicing software to prepare the print job. Just about any CAD software that ...